1
This tutorial will explain how to hack a rotary telephone and convert the analog numerical values into digital values using a computer, a microcontroller and software. Find two rotary telephones.
2
Remove microphone piece and replace it with an ear piece from 2nd rotary phone
3
Mount earpiece in former microphone cavity. This earpiece wih serve as a microphone.
4
Use a mini-jack stereo cable and cut off one end. Remove the casing. There are two cables inside. Splice casing from each cable and twist the ground wires together.
5
Attach mini-jack stereo cable to end of the telephone.
6
Wire 4 ends into 2 stereo cables. One for the mic and one for the ear.
7
Alternatively, you could use the end of the telephone jack's terminals to wire stereo cables.
8
use hot glue. Notice 2 cables: One for ear and one for microphone. Plug both stereo cables into computer.One for mic input and one for audio out.
9
To convert analog numbers into digital numbers, remove casing.
10
-locate the red and blue wires-screw two wires into each terminal. The rotary mechanism is the brain of the device. Each number dialed corresponds to a pulse. Example "0" is equal to 1 pulse and "1"is equal to 2 pulses.
11
Mount the two wires-1 wire goes into ground and the other wire into signal of a microcontroller.(phidget or arduino.) We are going convert an analog signal into a digital one
12
Two wires mounted into the digital input of a microcontroller. A software
patch will convert analog signals numerically into digital signals.
13
email me for patch on how to convert analog signal into digital signal..using Pure Data or Max MSP. Finished